Material: Polyolefin Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)
Minimum Shrinkage Temp: ≥80°C
Full Shrinkage Temp: ≥160°C begin to dissolve Temp:138ºC Completely dissolve Temp:160ºC
Operating Temperature: -55°C to +125°C
Tensile strength: 10.4 Mpa
Dielectric strength: 1 KV/mm
IP Grade:IP 67 Manufacture
specification: ISO9001
Flammability: Flame Retardant Approvals: UL Approved Supplied format (round or flat):
Product is supplied flat
Cutting method: Scissors or sharp knife
Descriptions: 100% brand new and high quality Easy to wire connection, welded, insulated and sealed May be the ideal use in marine and automotive applications Polyolefin pipe on the outside and hot melt adhesive on the inside Welding and seal and advanced with waterproof function Polyolefins heat sinks connectors butt tip better pulling force, Provides seal, strain relief, cable check, and insulation
Specifications: Material: Copper Tinned
Colors: Red, Blue, White, Yellow
Techinal Data
- Fit for Confined and Narrow Spaces - can be bent after connection and no need to crimp or solder in the confined area, just control the temperature via a heat gun.
- Better Waterproof and Seal Performance - there is two hot melt waterproof adhesive rings in each butt connector, which help it hold up better to moisture.
- High Temperature Proof in A Short Time: use exclusive material in the butt connectors to avoid shrink tubing melting before solder ring.
| Color |
Multi-color |
| Connector Type |
Twist , Butt Splice , Crimp |
| Contact Material |
Polyethylene |
| Gauge |
10,12,14,16,18,20,22,24,26 |
| Insulation Material Type |
Polyethylene |
| Material |
SOLDER TIN, Polyethylene |
| Measurement System |
Metric , Imperial |
Audited Supplier 
){kind=link}
){kind=link}